About PiVi

This author has not yet filled in any details.
So far PiVi has created 1404 blog entries.

The parts of a timber roof frame and what drives its cost

The cost of a roof truss is driven not only by timber price but above all by matching components to roof shape, span and wall layout. Check whether the quote covers rafters, wall plates, collar ties, purlins and posts together with connections and bracing. When comparing estimates, look at conformity of cross-sections and timber class with the design, and at labour intensity arising from valleys, corners and dormers. The key variable is the scope of documentation, assembly and protection, not the rate per square metre of roof surface alone.

By |2026-11-15T00:56:17+01:002024-11-30|Blog|Comments Off on The parts of a timber roof frame and what drives its cost

Photovoltaic roof monitoring: what it shows and what it misses

Monitoring helps you observe production and spot some irregularities more quickly. It is not, however, a remote inspection of the entire roof. The scope of the data depends on the devices, meters and system configuration. The owner should know which values are measured, which are calculated and how often they reach the app. Only then does the chart become a useful tool rather than a source of random conclusions. The basis is usually information about inverter operation and the energy generated over a given period. In a more extensive system, data from individual arrays or devices is available. Measuring household consumption and the flow to the grid may require an additional meter and correct wiring.

By |2026-11-15T20:22:14+01:002024-11-24|Blog|Comments Off on Photovoltaic roof monitoring: what it shows and what it misses

How a roof valley collects water and keeps it out of the roof

A valley gutter is the concave junction of two roof slopes that collects water from both sides and directs it to the eaves. When designing it, the key factor is the width of the exposed channel, matched to the volume of flowing water and the length of the drainage path. Check that the flashing has stable support in line with the roof system and does not deflect between fixing points. Pay attention to membrane layout with laps following the slope and to fixings kept outside the water flow path. Leave final design decisions to the system installer.

By |2026-11-15T00:57:11+01:002024-11-07|Blog|Comments Off on How a roof valley collects water and keeps it out of the roof

Getting long sheet metal flashings to site and storing them before fitting

Fabricating a long flashing can reduce the number of joints on the building. However, it must be delivered without permanent deformation. The thin profile requires support and proper surface protection. When planning an order, it is worth checking access, the unloading area and how the parts will be carried in. Ridge caps, barge flashings and gutter aprons may be the same length and yet behave differently when handled. Before confirming production, establish whether the vehicle can safely reach the unloading point. Check the available space and the route for carrying the elements. A long profile should not be bent to fit between obstacles. Such deformation may remain visible after installation.

By |2026-11-15T04:43:58+01:002024-11-06|Blog|Comments Off on Getting long sheet metal flashings to site and storing them before fitting

One leaking area or a failing roof covering? Deciding the scope of repairs

A leak does not usually mean the whole roof must be replaced. Before ordering a repair or accepting the work, establish where water actually enters, not merely where the stain appears. Check flashings, laps, fixings, windows and service penetrations, and note the weather in which the problem returns. A traced local fault on a sound substrate generally supports repair; widespread corrosion, damp layers or structural defects call for a broader assessment. Compare the scope of both options and establish which problems the cheaper variant leaves unresolved.

By |2026-11-15T04:42:27+01:002024-11-02|Blog|Comments Off on One leaking area or a failing roof covering? Deciding the scope of repairs

Modular metal roof tiles on a pitched roof: how to lay out the courses

The key is to confirm that the roof pitch and structure meet the requirements of the chosen modular metal roofing system before anything is ordered or accepted. Before carrying sheets onto the roof, check the current product instructions, the material schedule and the flashing plan, and organise safe access and a method for passing the modules up. On delivery, verify the markings, colour and condition of the packs, protecting them from moisture inside the packaging and from coating damage. These steps set the order for the work and reduce the risk of errors during installation.

By |2026-11-15T04:42:41+01:002024-10-27|Blog|Comments Off on Modular metal roof tiles on a pitched roof: how to lay out the courses

Choosing the covering and layer build-up for a flat roof

The choice of flat roof covering depends on whether all layers suit the actual fall pattern, not on the roof name in the project alone. Before buying materials, check the pitch of each section, because trapezoidal sheets and sandwich panels have their own requirements for minimum fall and joints. Also consider structural deflection under load, which can alter the path of water drainage. The selection should cover the whole roof, including parapets, outlets and planned installations, while design decisions remain with the designer.

By |2026-11-14T20:59:10+01:002024-10-20|Blog|Comments Off on Choosing the covering and layer build-up for a flat roof

Keeping an operating and inspection log for a photovoltaic roof

A photovoltaic roof logbook does not have to be an elaborate system. An orderly record of production, messages, inspections and important events is enough. It helps distinguish the effect of weather from a fault and establish what changed before the problem. With an integrated covering, it is worth recording both electrical and roofing matters. That way, after a few years, the history of the house does not have to be reconstructed from memory. Set up one folder and a simple register of dates. Put the as-built design, a map of active elements, instructions, reports and warranty terms in it. Note the device designations and service contacts. It is also good to know who is responsible for the covering and who for the electrical part.

By |2026-11-15T20:22:13+01:002024-10-17|Blog|Comments Off on Keeping an operating and inspection log for a photovoltaic roof

Roof access for maintenance: planning the route to the chimney and equipment

Safe access to and movement across a roof must be planned before you order the covering or fit the accessories. Above all, check that the brackets, steps and walkways suit the profile of the metal tile or trapezoidal sheet and that the roof structure can carry the load. Pay attention to the exit point, the route to the chimney and ventilation equipment, and the sealing of penetrations through the covering. A textured sheet alone is no substitute for a thought-through access route, and random fixing can lead to slipping, damaged metal and problems during later servicing.

By |2026-11-15T04:41:14+01:002024-10-16|Blog|Comments Off on Roof access for maintenance: planning the route to the chimney and equipment

Designing a façade with T18 trapezoidal steel sheet

Set out T18 trapezoidal steel sheets on a drawing of the elevation before ordering the cladding. Mark the window and door reveals, plinth, corners and top edge. Starting at those points, measure in cover widths, the part of each sheet that remains exposed after the overlap. The drawing shows where joints and cut edges will fall. Vertical ribs emphasise the height of the wall, while horizontal ribs emphasise its width. With horizontal ribs, pay particular attention to sheet joints and ends. With vertical ribs, check how water drains at the base.

By |2026-11-15T00:56:10+01:002024-10-15|Blog|Comments Off on Designing a façade with T18 trapezoidal steel sheet
Back to top