Blog2026-11-15T20:04:30+01:00

Choose a product group

Metal roofing

Blachy trapezowe — ilustracja kategorii

Sandwich panels

Płyty warstwowe — ilustracja kategorii

PIR insulation boards

Płyty izolacyjne PIR — ilustracja kategorii

XPS

Płyty XPS — ilustracja kategorii

Accessories

Wkręty i łączniki — ilustracja kategorii

Fencing

Sztachety metalowe — ilustracja kategorii

Blog

The Izoprofil.net blog answers practical questions about renovation, extensions and the sequence of work. Find out where to start looking for a leak, when to order roofing sheets, how to prepare a delivery area and what to establish before installing insulation. The articles cover measurements, the condition of existing components and order details for roofing, sandwich panels and PIR insulation. They explain which information to collect and when an on-site assessment by a professional is needed. Choose the article that matches the current task so you can prepare a more accurate materials enquiry and reduce rework.

Rafter dimensions and spacing: what governs the design?

In Poland, there is no single universal rafter cross-section suitable for every house. The choice depends on the member length, spacing, support conditions, timber class and roof loads, as well as deflection and the execution of connections. Readers should therefore check whether the design considers the whole system rather than a single beam, and what data to prepare for calculations. A choice based solely on a neighbouring building can lead to a costly mistake, because two rafters of the same length may work under completely different conditions.

Which insulated roof panels suit shallow and steep pitches?

A roof described as flat also needs a planned drainage path. A profiled roof sheet has a minimum pitch specified for the particular system. Joints, openings and deflection of the structure matter. Before you choose the covering for a new part of the building, check these conditions together with the height of the connection to the old roof. In common usage, a flat roof is a roof with a low pitch. Water must still have a route to the gutter or outlet. A lack of pitch or a local depression can lead to ponding. That is why a covering is not selected solely on the basis of the roof shape's name.

How do you compare the installed cost of sandwich panels from suppliers in Poland?

The lowest price per square metre of panel does not necessarily mean the cheapest wall. The outcome is determined by lengths, waste, transport and the possibility of using a specific batch. There is no single supplier who will be cheapest for every construction project. It is worth calculating the cost of the material used on the basis of your own cutting plan. Match the panel to the required application, thickness and core. Check the facings, coatings, Uc and mechanical data. If the project requires specific fire properties, the comparison must take them into account. A cheaper product that does not meet the requirements is not an equivalent offer.

PIR on flat roofs: sequencing boards, falls and waterproofing

A flat roof requires the successive layers to be handed over efficiently between the crews. PIR boards, tapered elements and waterproofing should reach the prepared substrate in a fixed sequence. It is worth marking out the zones, outlets and the areas that will be inspected before being covered in advance. PIR boards for a flat roof are selected according to how the covering is to be executed. Aluminium laminate, glass fleece and bitumen-coated facing are not interchangeable surfaces. Before unpacking, the type of facing and its orientation must be confirmed. In a system with different surfaces on the two sides, this matters for the next layer. At the outset, the delivered variant must be compared with the waterproofing system. If the board has different facings on the two sides, the orientation must be known to the whole crew.

Ordering parapet coping: measuring width, fall and corner details

The parapet flashing must cover the top of the wall and drain water in the intended manner. Its width follows from the finished wall cross-section including all layers. The order also requires the leg heights, the direction of fall and the geometry of the corners. A part that fits on a straight run may not resolve the termination at a higher wall. It is therefore worth preparing the measurement as a set of related details. Include the masonry, insulation and finishing layers on both sides. If measuring in advance, the intended thicknesses must be entered on the drawing. The dimension of the base or raw parapet alone is not sufficient. A cap that is too narrow may not ensure the correct position of the side edges.

Who should consider a concealed roof drainage system?

A concealed roof drainage system is chosen for a clean elevation, especially when the house lacks a wide eaves overhang. It is worth establishing exactly what should remain out of sight, as this term covers various arrangements – from a screened gutter to a downpipe running within the wall build-up. The designer should indicate the gutter position, the downpipe route and servicing access. Where easy access to connections matters, a simpler visible system may be more convenient day to day.

Back to top