About PiVi

This author has not yet filled in any details.
So far PiVi has created 1404 blog entries.

How does a standing seam roof work and what determines its weathertightness?

The standing seam is a connection of sheets above the flat field of the covering. This helps separate the joint from the main path of water runoff. However, it does not mean that such a roof is weathertight in every situation. The result depends on the type of connection, the pitch and the execution of details. The substrate and the possibility of sheet movement under temperature are also important. The standing seam is a longitudinal connection of suitably shaped sheet edges. In the traditional solution, the installer closes them with tools. Various forms of folding are possible, including single and double standing seam. There are also panels with a factory snap lock. They look similar from a distance, but their construction and method of installation should not be equated.

By |2026-11-14T11:10:54+01:002023-05-13|Blog|Comments Off on How does a standing seam roof work and what determines its weathertightness?

Planning a comfortable loft room under sloping ceilings

Before choosing furniture, start with accurate measurements – they determine how comfortable a sloped attic will be. Slopes take up part of the space but can also house storage and create quiet corners for rest. At the planning stage, combine the interior layout with insulation, light and ventilation. On the plan, mark the floor outline and the height under the slopes, paying attention to the areas around stairs, doors, posts and collar ties. Measure for the planned finish – insulation, framing and lining will take up space, so the raw structure can be misleading.

By |2026-11-15T00:56:12+01:002023-05-13|Blog|Comments Off on Planning a comfortable loft room under sloping ceilings

Comparing labour quotations for a sheet metal roof

In Poland, comparing labour costs for metal roof covering requires aligning offers to the same list of tasks, not just the rate per square metre. Check whether the quote includes the membrane, counter-battens, battens, flashings, gutters, scaffolding, material handling and cleaning. Establish who measures the roof, prepares the material schedule and is responsible for shortages. For renovations, clarify dismantling, waste sorting and interior protection, plus the rules for approving additional work once the substrate is exposed.

By |2026-11-14T17:32:06+01:002023-05-11|Blog|Comments Off on Comparing labour quotations for a sheet metal roof

Choosing between a tile-effect metal roof and bitumen shingles

In Poland, choosing between metal roofing tiles and bituminous shingles means comparing the whole roof, not just the price of the material. The two coverings differ in their substrate and installation, so the roof geometry, ventilation and conditions of use need checking. Before renovating, assess the structure's load capacity and every layer that makes up the complete system. The minimum pitch depends on the specific product and its instructions. The cost estimate should include transport, cutting losses and the state of the existing substrate. Finally, confirm that a team experienced in that installation is available.

By |2026-11-14T17:30:58+01:002023-05-09|Blog|Comments Off on Choosing between a tile-effect metal roof and bitumen shingles

Choosing T18 or T35 sheeting for the roof of an open shelter

In Poland, the choice between T18 and T35 sheet for a shelter roof depends on the span, loads and method of support. Before comparing profiles, check the location, height and surroundings of the structure, because an open design is exposed to wind action from below as well. Take into account the roof pitch, water drainage and the risk of condensation. Pass these data to the designer or the person selecting the covering. Only then compare load capacity, tightness and conditions of use, and finally the price.

By |2026-11-14T17:32:10+01:002023-04-28|Blog|Comments Off on Choosing T18 or T35 sheeting for the roof of an open shelter

Tile-effect or trapezoidal steel sheets for a roof?

The choice between a tile-effect metal sheet and trapezoidal sheeting depends on the roof geometry and support arrangement, not on the category name alone. Tile-effect sheet has longitudinal and transverse pressings forming repeated modules, which affects batten spacing and sheet fitting; trapezoidal sheeting has a simpler pattern of ribs running along the slope, and profile height shapes structural properties. Check the minimum pitch in the specific product's instructions, the batten spacing set by the module or profile parameters, and the condition of existing substructure during renovation. Compare both variants drawn on the same roof, including laps, flashings and offcuts.

By |2026-11-15T00:58:13+01:002023-04-18|Blog|Comments Off on Tile-effect or trapezoidal steel sheets for a roof?

Replacing a T18 or T35 roof: checks before changing the profile

Switching from T18 to T35 is not simply a matter of choosing a trapezoidal sheet with a higher profile. It can change the cover width, the number of sheets and the detailing at the terminations. In a renovation, the existing supports must also be checked. Below we compare actual profile types and show how to go from their dimensions to the cutting plan and the complete order. The number in the name usually indicates the nominal profile height in millimetres. T35 has a higher rib than T18. However, this does not mean that the name alone determines the load-bearing capacity. The assessment requires the full geometry, the steel thickness and grade, and the support conditions.

By |2026-11-14T17:30:18+01:002023-04-13|Blog|Comments Off on Replacing a T18 or T35 roof: checks before changing the profile

How to buy insulated wall panels with a mineral wool core from outlet stock for a planned extension?

Outlet stock can help reduce the cost of the building envelope if the available batch suits the project. First, cosmetic defects must be separated from damage that affects how the panel performs. Then lengths and joints should be compared. In staged extensions, it is particularly important to be able to assemble a complete wall from matching components. Outlet is a commercial term that does not describe one fixed list of defects. A price reduction may be due to a scratch, a different shade, an unusual length or a leftover from an order. It may also be due to more serious damage. It is therefore necessary to obtain a description of the specific pieces, not just an assurance that the panels are ‘almost new’.

By |2026-11-14T11:11:09+01:002023-04-13|Blog|Comments Off on How to buy insulated wall panels with a mineral wool core from outlet stock for a planned extension?

What purlins do in a roof and how they are selected

Roof purlins act as load-bearing members running along the roof: in a timber roof structure they support the rafters, while in a steel structure they often provide direct support for sheeting or sandwich panels. When selecting them, check not only the section and spacing but also the entire system, including span, loads, connections, bracing and fixings. It is essential that the purlin is supported on the intended supports, such as columns or suitably designed walls, and that the whole system transfers forces in accordance with the technical documentation.

By |2026-11-15T00:57:05+01:002023-04-12|Blog|Comments Off on What purlins do in a roof and how they are selected

Choosing a covering for a heated or unheated garage roof

First decide whether the garage is merely to shelter a car or to serve as a workshop, and record this before choosing the covering. Check the roof pitch, the type of supports and whether the interior will be heated. For an unheated building, trapezoidal T18 or T35 may be considered, whereas a heated one requires a complete insulated partition or a suitable insulated roof panel. Allow for condensation, ventilation and drainage, since vapour can condense on the cold underside of the covering. A quotation should refer to a specific product, not merely a category.

By |2026-11-14T21:02:42+01:002023-03-24|Blog|Comments Off on Choosing a covering for a heated or unheated garage roof
Back to top