+48 500 409 109

Choosing between a tile-effect metal roof and bitumen shingles

In Poland, choosing between metal roofing tiles and bituminous shingles means comparing the whole roof, not just the price of the material. The two coverings differ in their substrate and installation, so the roof geometry, ventilation and conditions of use need checking. Before renovating, assess the structure's load capacity and every layer that makes up the complete system. The minimum pitch depends on the specific product and its instructions. The cost estimate should include transport, cutting losses and the state of the existing substrate. Finally, confirm that a team experienced in that installation is available.

By |2026-11-14T17:30:58+01:002023-05-09|Blog|Comments Off on Choosing between a tile-effect metal roof and bitumen shingles
Read More

Choosing T18 or T35 sheeting for the roof of an open shelter

In Poland, the choice between T18 and T35 sheet for a shelter roof depends on the span, loads and method of support. Before comparing profiles, check the location, height and surroundings of the structure, because an open design is exposed to wind action from below as well. Take into account the roof pitch, water drainage and the risk of condensation. Pass these data to the designer or the person selecting the covering. Only then compare load capacity, tightness and conditions of use, and finally the price.

By |2026-11-14T17:32:10+01:002023-04-28|Blog|Comments Off on Choosing T18 or T35 sheeting for the roof of an open shelter
Read More

Tile-effect or trapezoidal steel sheets for a roof?

The choice between a tile-effect metal sheet and trapezoidal sheeting depends on the roof geometry and support arrangement, not on the category name alone. Tile-effect sheet has longitudinal and transverse pressings forming repeated modules, which affects batten spacing and sheet fitting; trapezoidal sheeting has a simpler pattern of ribs running along the slope, and profile height shapes structural properties. Check the minimum pitch in the specific product's instructions, the batten spacing set by the module or profile parameters, and the condition of existing substructure during renovation. Compare both variants drawn on the same roof, including laps, flashings and offcuts.

By |2026-11-15T00:58:13+01:002023-04-18|Blog|Comments Off on Tile-effect or trapezoidal steel sheets for a roof?
Read More

Replacing a T18 or T35 roof: checks before changing the profile

Switching from T18 to T35 is not simply a matter of choosing a trapezoidal sheet with a higher profile. It can change the cover width, the number of sheets and the detailing at the terminations. In a renovation, the existing supports must also be checked. Below we compare actual profile types and show how to go from their dimensions to the cutting plan and the complete order. The number in the name usually indicates the nominal profile height in millimetres. T35 has a higher rib than T18. However, this does not mean that the name alone determines the load-bearing capacity. The assessment requires the full geometry, the steel thickness and grade, and the support conditions.

By |2026-11-14T17:30:18+01:002023-04-13|Blog|Comments Off on Replacing a T18 or T35 roof: checks before changing the profile
Read More

Choosing a covering for a heated or unheated garage roof

First decide whether the garage is merely to shelter a car or to serve as a workshop, and record this before choosing the covering. Check the roof pitch, the type of supports and whether the interior will be heated. For an unheated building, trapezoidal T18 or T35 may be considered, whereas a heated one requires a complete insulated partition or a suitable insulated roof panel. Allow for condensation, ventilation and drainage, since vapour can condense on the cold underside of the covering. A quotation should refer to a specific product, not merely a category.

By |2026-11-14T21:02:42+01:002023-03-24|Blog|Comments Off on Choosing a covering for a heated or unheated garage roof
Read More

Affordable roof coverings for a house, garage or garden shelter

The lowest sheet price does not guarantee the cheapest roof, because the final cost depends on the shape of the slopes, the support, waste, flashings and labour. Before comparing offers, establish the function of the building: an open gazebo needs only rain cover, while a heated building requires a full insulation system, which changes the scope of work. Then check whether the quote includes all elements, not just the sheet metal itself. Compare the price per square metre of effective covering together with accessories and transport to avoid apparent savings.

By |2026-11-15T00:57:29+01:002023-03-20|Blog|Comments Off on Affordable roof coverings for a house, garage or garden shelter
Read More

What helps when installing T18 and T35 trapezoidal sheets?

In Poland, the installation of T18 and T35 trapezoidal sheets is made easier by the regular profile and the option to order sheets in suitable lengths. Readers should nevertheless check the evenness of the structure, the layout of the sheets and the method of fixing, as these factors determine how the work proceeds. Longitudinal ribs establish the direction of laying and water runoff, and on a regular roof it is easier to plan bands from the upper edge to the eaves. Preparing sheets to length reduces cutting on site but requires accurate measurement that accounts for flashings, overlaps and the eaves overhang.

By |2026-11-14T17:32:32+01:002023-03-18|Blog|Comments Off on What helps when installing T18 and T35 trapezoidal sheets?
Read More

How to choose the colour of trapezoidal steel sheet for an extension and later repairs?

The colour of the steel sheet is best chosen on a real sample, together with the type of coating. The same RAL number does not describe the gloss, texture or the appearance of a weathered roof. With an extension, matching to existing elements is also required. It is worth settling these matters before ordering the sheets and the complete set of flashings. The RAL designation organises the colour, but does not replace a full description of the product. In steel sheet catalogues one finds, among others, anthracite RAL 7016, grey-white RAL 9002 and shades of red and brown. The presence of a colour in the palette does not prove that it is the most frequently bought or available off the shelf.

By |2026-11-14T11:12:53+01:002023-02-28|Blog|Comments Off on How to choose the colour of trapezoidal steel sheet for an extension and later repairs?
Read More

Roofing costs: where can you save without compromising the roof?

Saving on a roof should begin with a reliable measurement, simple details and a comparison of complete offers. Limit waste and unnecessary delivery costs, but do not omit the layers or fixings that are essential for the covering to perform. Check whether the prices being compared refer to a gross or effective covering metre, then compare the steel core thickness, coating and intended use of the sheet. For an existing roof, establish who is responsible for the measurement and checking the structure. On a simple slope, consider blachodachówka cut to length and trapezoidal sheet, while shorter modules may suit a more complex layout. The final outcome is determined by the cutting plan, not a general promise of waste-free installation.

By |2026-11-14T21:00:38+01:002023-02-27|Blog|Comments Off on Roofing costs: where can you save without compromising the roof?
Read More

Wind resistance on a roof: six points to check during installation

A roof's wind resistance depends on the consistent interaction of structure, covering, fasteners and details, not on the number of screws alone. Before measuring, ordering or accepting metal roof tiles, trapezoidal sheeting or sandwich panels, it is worth establishing the loads arising from the building's location, shape and geometry and from how it is used. The entire path by which forces are transferred should be checked, with particular attention to edges and corners. A fixing pattern should not be copied from another building, because openings, gates and internal pressure affect the working conditions.

By |2026-11-15T04:42:44+01:002023-01-27|Blog|Comments Off on Wind resistance on a roof: six points to check during installation
Read More
Back to top