Blog2026-11-15T20:04:30+01:00

Choose a product group

Metal roofing

Blachy trapezowe — ilustracja kategorii

Sandwich panels

Płyty warstwowe — ilustracja kategorii

PIR insulation boards

Płyty izolacyjne PIR — ilustracja kategorii

XPS

Płyty XPS — ilustracja kategorii

Accessories

Wkręty i łączniki — ilustracja kategorii

Fencing

Sztachety metalowe — ilustracja kategorii

Blog

The Izoprofil.net blog answers practical questions about renovation, extensions and the sequence of work. Find out where to start looking for a leak, when to order roofing sheets, how to prepare a delivery area and what to establish before installing insulation. The articles cover measurements, the condition of existing components and order details for roofing, sandwich panels and PIR insulation. They explain which information to collect and when an on-site assessment by a professional is needed. Choose the article that matches the current task so you can prepare a more accurate materials enquiry and reduce rework.

How to reduce the risk of leaks in a metal roof

The watertightness of a metal roof is decided at the design and material selection stage, not by the amount of sealant alone. Before purchase, check the instructions for the specific profile, as slope requirements differ for tile-effect sheets, trapezoidal sheets and sandwich panels, and may also vary with longitudinal joints. Measure the actual roof, especially during renovation, so deflections do not trap water. Focus most attention on valleys, chimneys, penetrations and unobstructed drainage. Correct runoff and careful details are the basis of watertightness throughout the service life.

Square gutters on a metal roof: shape, capacity and detailing

In Poland, a square gutter stands out mainly for its appearance, not automatically for greater capacity. Its shape pairs well with metal roofing and simple flashings, underlining a modern building form. Before choosing, check the actual cross-section, outlet positions, fixing method and access for cleaning. Also consider the system variant — visible, covered by a fascia or concealed — and compare colour on real samples with the roofing and joinery. Leave the sizing decision to the designer, as the whole arrangement up to the pipe outlet matters.

What the name Oborniki panel means when buying building panels

Płyta obornicka is the colloquial name for a sandwich panel. In conversation it helps to identify the group of materials, but it is not enough to place an order. Under this term you can find various cores, facings and applications. If you are extending a building, first identify the existing panel. Then select the new material and the method of connecting both parts. A typical sandwich panel for cladding has two thin facings and an insulating core. The facings are often made of coated steel. The core may be PIR or PUR foam, polystyrene or mineral wool. The layers are bonded and work together as a component intended for a specific application.

Tile-effect metal roofing or concrete tiles: what suits your roof?

The choice between metal roofing and concrete tiles depends mainly on whether the roof structure and pitch are ready for the heavier covering. Metal roofing is usually much lighter, while concrete tiles consist of many small, individually replaceable elements. Check the load-bearing capacity of the structure, the roof pitch, the manufacturer's requirements for underlayers and fixings, and the full estimate including accessories and flashings. The price per square metre of material alone does not settle the comparison, and the decision should be made before ordering.

A year-round maintenance plan for a metal picket fence

A fence is easier to maintain when you know what to check and when. No elaborate system is needed. Documentation of the material, a few fixed inspection points and a record of the work carried out are enough. Metal fence pickets have a factory-applied coating, but they require attention depending on where they are used. A good plan combines regular inspections with a response to specific events. Keep the specification of the metal fence pickets, the user instructions, the coating data and the installation information. Add the documents for the structure and the gate fittings if they relate to the fence. This way you do not have to search for cleaning rules in random advice each time. It is also clear which material to choose for a later replacement.

Spare roofing sheets and accessories for future repairs

A small stock of the correct material can make a future repair easier. However, fibre cement sheets must be selected and stored consciously. Asbestos-free fibre cement of a similar appearance does not necessarily match the existing roof surface. It is worth keeping not only the sheets but also the data on the profile, the variant and the accessories used. The number of spare sheets depends on the size of the roof surface, the number of formats and the possibility of obtaining them later. There is no single percentage value suitable for every project. A simple roof with one format requires a different approach from a layout with many short elements and penetrations. It is worth distinguishing between stock for offcuts during installation and material intended for later servicing.

Back to top