Blog
The Izoprofil.net blog answers practical questions about renovation, extensions and the sequence of work. Find out where to start looking for a leak, when to order roofing sheets, how to prepare a delivery area and what to establish before installing insulation. The articles cover measurements, the condition of existing components and order details for roofing, sandwich panels and PIR insulation. They explain which information to collect and when an on-site assessment by a professional is needed. Choose the article that matches the current task so you can prepare a more accurate materials enquiry and reduce rework.
How to install internal insulation and maintain continuity of the aluminium cladding?
With internal insulation, not only the board thickness matters. The condition of the wall and the continuity of the layers at the floor, window and services also determine the outcome. Aluminium cladding can significantly restrict vapour transmission. However, it acts as part of a planned building envelope, not as a way to cover a damp wall. First establish the cause of the cold and moisture. Check the roof, gutters, plinth and water services. Assess the condition of the plaster and ventilation. Insulation on the room side reduces heat flow to the old wall. Its performance after renovation must therefore be verified in a thermal and moisture analysis.
How to plan inexpensive insulation for a garage or seasonally used cabin?
A garage, storage room and summer cabin do not automatically need the same insulation. First establish when the building will be heated and what it is used for. An inexpensive renovation starts with a well-defined scope of work. A thin board bought without a plan can mean dismantling it again when the pattern of use changes a year later. In an unheated storage room, insulation alone will not generate heat. It will slow the rate of heat exchange with the surroundings but will not guarantee a temperature above freezing during frost. If you store materials that are sensitive to cold, a heat loss balance and possibly heating are needed. The name 'insulation board' alone does not settle this question.
Planning the replacement of an existing roof covering
Plan a roof covering replacement by inspecting the old structure and the layers beneath the existing material before ordering sheet metal. Check the condition of the timber, fixings and deflections, and identify the causes of leaks — these may stem from damaged flashings, condensation or a damp substrate. Also assess chimneys, gutters and service penetrations. New sheet metal will not fix a weakened rafter or poor ventilation. The formalities depend on whether you are reinstating the covering or changing the structure, geometry or use of the loft; confirm the correct procedure with the person managing the documentation.
What is a 60 mm mineral wool wall panel sufficient for, and are there thinner variants?
The 60 mm mineral wool panel appears in some wall panel ranges. It may suit certain partitions and conditions of use, but it does not automatically deliver the parameters required in a heated building. The 40 mm variant must be checked within a specific product family. The thickness range known from PIR panels must not be attributed to mineral wool. In an example family of mineral core wall panels, the 60 mm thickness has a Uc of approximately 0.66 W/(m²K) and a weight of 14.1 kg/m² with 0.5/0.5 mm facings. These are the data for a specific product. Other solutions may have different properties or may not be available in that thickness at all.
Choosing laminate-faced panels for buildings exposed to ammonia and frequent washdowns
In a livestock building, the entire internal surface must be assessed. This includes the cladding, joints, fasteners and flashings. Glass-fibre-reinforced laminate can be part of a suitable solution. However, it does not mean resistance to every ammonia concentration or to any cleaning agent used during washing. Gather information on the humidity, temperature and usage of the room. Ventilation and the presence of aggressive substances are also important. The term ‘agricultural building’ alone covers very different conditions. A dry store performs differently from a cowshed, and differently again from a room that is regularly disinfected.
What should an environmental assessment of a metal roof include?
A fair environmental assessment of a metal roof requires looking at the whole cycle: material use, durability, repairs and later recycling. Check the scope of the product's environmental declaration, its declared unit and the stages covered, rather than comparing isolated figures. Separate the technical possibility of recovering steel from how removed sheets are actually handled. When designing, compare equivalent roof assemblies including insulation, substrate and fixings, not just the sheet. Ask for documents for the chosen product, calculate quantities carefully and plan maintenance. Leave design decisions to the designer.





