+48 500 409 109

What to check before applying for asbestos roof removal funding in Poland

This guide covers procedures that apply in Poland. Before commissioning any work, ask your local municipality whether applications are open and which costs the scheme covers. Asbestos programmes often pay for taking down, collecting, moving and disposing of waste, yet they do not always include a new roof covering. Request the scheme documents and divide your estimate into two parts: asbestos removal and fitting the new roof. Also confirm who settles with the contractor and what own contribution applies.

2026-11-14T20:59:12+01:00
Read More

Roof and wall U-values in Poland: which requirements apply to a project in 2026?

If you are insulating a house in Poland, ask the designer for the required U-value of the complete wall or roof before ordering materials. As of 1 November 2026, a transitional period allows certain projects to use the earlier Polish building regulations. The type of work, the approval procedure and the design temperature of the room all matter. Look for the assembly’s U-value in the design and the material’s thermal conductivity, or lambda, on its data sheet. Choosing a board with a low lambda does not by itself establish that the finished wall or roof meets the requirements.

2026-11-15T04:42:25+01:00
Read More

Polish VAT on roofing materials and roofing work

In Poland, roofing materials bought separately are generally subject to 23% VAT. When a contractor undertakes a renovation and supplies materials as part of that work, the 8% rate depends on the type of work and whether the house or flat meets the statutory conditions. The relevant measurement is the usable floor area of the dwelling. The area of roof covering ordered does not determine the rate. Before comparing gross prices, check what each quotation includes and what the contractor undertakes to deliver. This guide describes the position on 1 November 2026.

2026-11-15T00:58:20+01:00
Read More

Budgeting for a complete roof with tile-effect metal sheets

First establish which unit the metal roofing tile price refers to, as this determines how offers compare. The profile, coating and sheet thickness all affect cost, as does the way surface area is settled. Bear in mind that effective area accounts for sheet overlaps, so a rate per total metre alone can be misleading. Add cut-offs, flashings, fixings and installation to the budget. The best approach is to compare complete roofs with identical parameters and scope of work, using the same units, thickness and coating.

2026-11-14T21:02:47+01:00
Read More

Roof insulation: details that matter during installation

Roof insulation performs effectively only when the insulation is continuous, moisture is controlled and the junctions are airtight. Before installation, it is worth checking the entire layer build-up, the fixings and the details at the eaves and chimney, because good board parameters alone will not repair gaps. On a pitched roof, insulation can sit between the rafters, below them or above them; the above-rafter option makes a continuous layer easier but requires external access and checking of the eaves, wall and window details. Leave the choice of system to the designer.

2026-11-14T21:02:06+01:00
Read More

Scheduling electric car charging to use surplus rooftop solar power

Charging a car with energy from the roof requires more than simply plugging the car in on a sunny day. You need to know the home's current energy balance and have devices that can regulate consumption accordingly. The most important factors are the hours the car is parked, the minimum charging requirements and the priorities of other loads. A well-configured system helps to use surplus energy, but does not guarantee that every journey will be powered exclusively by your own energy. Surplus is the energy that remains after current demand and other planned flows have been taken into account. If the roof is producing a lot but appliances in the home are running, the power available for the car may be small. Control should therefore be based on proper measurement of the balance.

2026-11-15T20:22:49+01:00
Read More

How loads travel through the structure of a roof

In Poland, a roof structure carries its own weight, the covering, and loads from snow and wind, and its elements must work together from the rafters to the anchoring in the walls. Before work begins, it is worth tracing the path of force transfer: from the covering through battens, counter-battens, and rafters, to purlins, wall plates, and supports specified in the design. Not every roof has all these parts, and the layout depends on the span, building shape, and intended use of the attic. The condition of the timber, connections, and anchorages should also be checked, as earlier alterations may have weakened the structure.

2026-11-14T17:30:23+01:00
Read More

How much sheet metal and installation should you budget for on a 200 m² roof?

For a 200 m² roof, it is not enough to multiply the area by the price from the first quote. You need to know the cutting plan, the coverage width and the scope of work. The metal sheeting is only one part of the cost. The example below shows the calculation method for fixed assumptions. The amounts given are for calculation purposes and do not constitute a sales offer. First, establish where the square metre figure comes from. Floor area or building footprint is not automatically roof area. Slopes, eaves and the shape of the roof pitches must be taken into account. Only the result of the roof measurement allows the cutting plan for the sheets to be prepared.

2026-11-14T14:21:29+01:00
Read More

Roof steps and chimney walkways: planning access for maintenance

Steps and chimney platforms form a planned access route to areas requiring maintenance on the roof, reducing walking on random parts of the covering. Before installation, check that the brackets match the profile, structure and roof pitch, and that the set has adequate documentation. Remember that these elements do not automatically replace fall protection. Their layout should follow actual maintenance needs, account for the entry point, the route across the roof slope and the working position, and leave design decisions to the designer.

2026-11-14T20:59:03+01:00
Read More

Ways to use sheet metal on a contemporary roof

The choice of sheet metal for a modern building's roof depends primarily on the roof geometry, not on colour alone. The investor should check the roof pitch, the support layout and the drainage path before selecting the profile, coating and structure. Only then is it worth assessing whether a given product suits the intended appearance of the building. Trapezoidal sheet, modular tile-effect sheet and sandwich panels produce different effects, so the functions of materials must be clearly separated to avoid using the wrong product in the wrong place.

2026-11-14T21:00:43+01:00
Read More
Back to top