+48 500 409 109

How to compare the price of tile-effect metal roofing with the full cost of an order?

The price of tile-effect metal roofing per square metre helps to compare the material, but does not describe the cost of the finished covering. Full modules, cut-offs, flashings and the method of delivery are important. For a renovation, dismantling the old roof is added. To choose an offer, the same scope must be compared. It is worth doing this before setting the date for the team's work. Check whether the seller calculates the total area or the coverage after overlaps. For a panel with overall dimensions of 1190 × 736 mm, the area is approximately 0.876 m². If its coverage is 1150 × 700 mm, one element covers 0.805 m². These are parameters of an example variant, not of all tile-effect metal roofing.

By |2026-11-14T11:10:34+01:002024-09-24|Blog|Comments Off on How to compare the price of tile-effect metal roofing with the full cost of an order?
Read More

How do you choose insulation for a house made of ceramic blocks before finishing the façade?

A ceramic wall does not have a single, common thermal parameter. The blocks, their thickness, the mortar and the details executed all matter. The insulation is selected for the whole wall. It is easiest to avoid rework when the insulation thickness is determined before window sills, roof flashings and the fixing of façade equipment. Find the block marking and the solution specified in the design. Do not compare two houses solely by the red colour of their walls. Products differ in the arrangement of voids and in thermal properties. Also check the wall thickness and the type of joints. In an extension, the older part may have a completely different construction from the new one.

By |2026-11-14T11:12:17+01:002024-09-19|Blog|Comments Off on How do you choose insulation for a house made of ceramic blocks before finishing the façade?
Read More

What affects the durability of a tile-effect metal roof?

In Poland, the durability of a metal roof tile depends primarily on the quality of the steel, the type of surface protection, environmental conditions and the care taken in roof installation. Before buying, check the product specification: the nominal thickness of the steel core, the type of metallic and organic coating, and the compatibility of accessories. Colour alone or a trade name for a standard is not enough, because a long warranty period does not mean no maintenance is needed, nor that the colour will remain unchanged throughout that time. Coating parameters should be assessed together with the intended use of the covering and environmental conditions, not solely on the number of years in the offer headline.

By |2026-11-14T17:31:36+01:002024-09-19|Blog|Comments Off on What affects the durability of a tile-effect metal roof?
Read More

Can T18 trapezoidal steel sheet be used for a soffit?

T18 trapezoidal sheet can be considered as soffit cladding if the design accounts for its profile, fixing and working conditions. Before ordering, check the actual cover width and the visible side, because the profile designation does not define all sheet dimensions. Plan ventilation, support and terminations at the wall and roof edge. The substructure must be stable and level, with support spacing and fasteners suited to the adopted solution. Remember that the full sheet alone does not provide the required ventilation opening area.

By |2026-11-15T00:56:49+01:002024-09-15|Blog|Comments Off on Can T18 trapezoidal steel sheet be used for a soffit?
Read More

Which sandwich panel installation mistakes can you prevent before delivery?

A crooked first panel makes laying the subsequent ones difficult. A lack of space for unloading can bring the whole day's work to a halt. Many installation defects therefore begin before the screwdriver is used. Check what to prepare in advance, where to set up inspection points and when to stop work instead of hiding the problem under another flashing. It is not enough for all the columns and purlins to be in place. Check their position, the bearing plane and dimensional conformity with the design. A structural error can carry over to the joint line and the wall ends. Tightening the panel with screws is not intended to straighten a misaligned support.

By |2026-11-14T14:22:21+01:002024-09-04|Blog|Comments Off on Which sandwich panel installation mistakes can you prevent before delivery?
Read More

Preparing and installing modular tile-effect metal roofing

In Poland, installing modular metal roof tiles requires above all a level, stable substrate and correct batten spacing, so before covering it is worth confirming that the delivery matches the order and checking the profile, coating, colour, quantity and visible damage. Store the panels on suitable supports in line with the instructions, and secure a wet pack promptly. Agree the covering layout plan, laying direction and cut placement with the contractor. Check the first panels at the eaves and the junctions at chimneys and windows before they are concealed.

By |2026-11-14T17:31:19+01:002024-09-01|Blog|Comments Off on Preparing and installing modular tile-effect metal roofing
Read More

What do 100 linear metres of steel sheet cost, and how much roof will they cover?

One hundred linear metres of steel sheet does not mean one hundred square metres of roof. The result depends on the sheet width and the coverage width. You also need to know the unit used in the quote. Simply separating these concepts allows you to compare offers and order the right number of elements without double-counting the overlaps. A linear metre describes the length of a sheet of a fixed width. If an order comprises ten elements of 10 m each, the total is 100 linear metres. Twenty elements of 5 m each give the same total. However, this does not mean the same laying pattern on the roof.

By |2026-11-14T14:21:42+01:002024-08-13|Blog|Comments Off on What do 100 linear metres of steel sheet cost, and how much roof will they cover?
Read More

What sets modular tile-effect roofing apart and when is it a good fit?

Modular metal roof tiles stand out for their small sheets with a repeating profile, which make handling, planning cuts and replacing a single fragment easier. They offer the most benefit on a roof with numerous hips and valleys, where shorter sheets give greater freedom in layout. Before buying, compare the covering area, installation requirements and full system cost, and check in the product data sheet that module length, sheet length and effective dimensions are clearly separated. The choice should depend on roof geometry, site organisation and the cost of the complete covering, not on format alone.

By |2026-11-14T21:01:14+01:002024-08-11|Blog|Comments Off on What sets modular tile-effect roofing apart and when is it a good fit?
Read More

Planning the replacement of an existing roof covering

Plan a roof covering replacement by inspecting the old structure and the layers beneath the existing material before ordering sheet metal. Check the condition of the timber, fixings and deflections, and identify the causes of leaks — these may stem from damaged flashings, condensation or a damp substrate. Also assess chimneys, gutters and service penetrations. New sheet metal will not fix a weakened rafter or poor ventilation. The formalities depend on whether you are reinstating the covering or changing the structure, geometry or use of the loft; confirm the correct procedure with the person managing the documentation.

By |2026-11-15T00:58:30+01:002024-07-26|Blog|Comments Off on Planning the replacement of an existing roof covering
Read More

Choosing laminate-faced panels for buildings exposed to ammonia and frequent washdowns

In a livestock building, the entire internal surface must be assessed. This includes the cladding, joints, fasteners and flashings. Glass-fibre-reinforced laminate can be part of a suitable solution. However, it does not mean resistance to every ammonia concentration or to any cleaning agent used during washing. Gather information on the humidity, temperature and usage of the room. Ventilation and the presence of aggressive substances are also important. The term ‘agricultural building’ alone covers very different conditions. A dry store performs differently from a cowshed, and differently again from a room that is regularly disinfected.

By |2026-11-14T14:21:13+01:002024-07-22|Blog|Comments Off on Choosing laminate-faced panels for buildings exposed to ammonia and frequent washdowns
Read More
Back to top